Test strips are essential tools to manage the operation of hot tubs. It helps you keep the hot tub clean and safe. They are crucial tools to keep the hot tub beautiful and keep the water clean. You do not want to dip into dirty water and have a dark green nightmare. The best hot tub test strips at The Hot Tub Superstore offer the opportunity to test the chlorine or bromine levels. You need to test these levels as bromine and chlorine are the sanitizers responsible for keeping the water or hot tub safe and clean. It is equally important as balancing the pH levels. Knowing the levels is essential to let the sanitizers do their job effectively.
If you are thinking about whether test strips work or not, they are very accurate and are a great alternative to test kits, often used for pools.
Are all test strips of the same kind?
No, stores do not have only one type of test strip. There are various types, which are responsible for testing different things. For example, you can get a standard 5-way test strip for the hot spring spas that tests bromine, Alkalinity, pH, chlorine, and total hardness. While another test strip, called the salt test strip, only tests salt in the water. Hot tub test strips are available in many types, and you should choose according to your requirements.
Choosing the suitable test strips
The types of test stripes mentioned above are helpful for special cases. The hot tub test strips are made for hot spring spas. It is tied to your warranty; hence you should make the most use out of it. For any other hot spring spa models, you should use the 5-way test stripes because they are accurate and a great pick.
Things to look for on a test strip
The last thing to look for in a test strip is that it should detect your sanitizer levels. It should get the pH and Alkalinity levels of your hot tub too. These are the three essential things that you should look for while buying hot tub test strips. Ensure that you check the reader for both chlorine and bromine; you can do so by reading the pad of the sanitizer.
How to use a hot tub test strip
Before testing
When testing the tube, the water should be as still as it can be. Take some time to water, turn off the pumps, jets and wait for the water to settle.
To operate the test strip, hold it through the bottom of the test strips. There are a number of pads on the test strips that are useful for testing various things in the spa water. Below the parts are the empty strip of the test strip; the empty part is the bottom of the strip.
Testing part-1
Insert the test strip in the water, and it should be deep equal to your wrist. Keep the strip inside the water for a particular amount of time. It will depend on the test strip to decide for how long you need to keep the test strip inside the water. The amount of time required is always written on the side of the bottle. Also, remember not to swirl the test strip inside the water.
Testing part-2
Keep the test strip level equivalent to the ground. Its pads should be facing upwards. For the test strips, you should wait for about 15 minutes for the water to drain off.
After removing the test strip from the hot tub, you should hold the test strip and make a comparison between the colors on the test strip pads to those located on the back of the bottle. You will see the testing for chlorine and bromine. It will give you an easy comparison and clear reading of the water.
Get your hot tub test strips at low cost and the best quality at The Hot Tub Superstore.
